Intelicis 880AG Indoor Access Point

Features at a Glance

  • 5.8GHz and 2.4GHz dual-radio design with optional SuperAG mode deliver industry-leading throughput performance
  • Automatic selection of optimal power level and operating frequency reduce radio interference and increase system efficiency
  • Configurable load balance and client management features provide fair access of wireless resource even under heavy traffic condition
  • Rogue access points detection and notification alerts IT managers on possible security loophole
  • Support of dynamic WEP, TKIP, AES and 802.11i protects sensitive information over the wireless channel
  • 802.1x EAP authentication with dynamic key management ensures only authorized users can access wireless resource in enterprise
  • MAC authentication adds extra security and authenticates legacy devices without EAP clients
  • Both 802.1 and MAC authentication working with remote RADIUS Servers provide a highly scalable access control mechanism for large enterprise
  • VLAN-based multiple SSID simplifies the service provision when deploying a shared multi-service WLAN infrastructure
  • Parameters such as encryption cipher, authentication methods, access rights and more can be configured for each SSID
  • Voice, secured data, video or guest network service can be mapped to a SSID configured with the appropriate set of parameters
  • 802.3af Power over Ethernet (PoE) eliminates the costly effort to install AC power outlets for each AP
  • AP to AP wireless repeater mode covers hard-to-reach areas without additional Ethernet wiring
  • Automatically download configuration and firmware from the Intelicis Wireless Controller eliminates the need to configure the access point individually


Ethernet Port

  • One IEEE 802.3 10/100BaseT Fast Ethernet port (RJ-45)
  • Auto negotiation for the rate, duplex and polarity
  • IEEE 802.3af Power over Ethernet

Wireless IEEE 802.11a Port

  • One IEEE 802.11a OFDM radio
  • Media Access Protocol: CSMA/CA with ACK
  • Power Output: 18dBm with power level control
  • Data Rate:
    108Mbps (Atheros Super AG mode)
    54/48/36/24/18/12/9/6 Mbps
  • Frequency Band:
    5.150-5.250 GHz (lower band) for US/Canada
    5.250-5.350 GHz (middle band) for US/Canada
    5.725-5.825 GHz (upper band) for US/Canada
    5.180 GHz, 5.200 GHz and 5.220 GHz for Japan
    5.500-5.700 GHz for Europe

Wireless IEEE 802.11g Port

  • One IEEE 802.11g CCK and OFDM radio
  • Media Access Protocol: CSMA/CA with ACK
  • Power Output: 20dBm (802.11b) and 18dBm (802.11g) with power level control
  • Data Rate:
    108Mbps (Atheros Super AG mode)
    11/5.5/2/1 Mbps legacy CCK rates
    54/48/36/24/18/12/9/6 Mbps
  • Frequency Band:
    2.412-2.462 GHz for US and Canada
    2.412-2.484 GHz for Japan
    2.412-2.472 GHz for Europe

Wireless Management

  • Automatic channel selection
  • Transmission power control
  • Auto WDS repeater mode support
  • RTS/CTS threshold setting
  • Fragmentation threshold setting
  • Selectable beacon and DTIM interval
  • Load balancing and rate limit
  • Support up to 31 WLANs with own unique SSID
  • Unique BSSID for each SSID WLAN
  • SSID to VLAN mapping
  • Hidden Broadcast SSID for each WLAN

Bridging and VLAN

  • IEEE 802.1d spanning tree
  • Support up to 512 MAC learning addresses
  • Support 802.1Q VLAN ids
  • Support up to 2048 MAC address filter
  • Secured Wireless LAN user isolation


  • IEEE 802.3 Protocol (Ethernet)
  • Static IP or dynamic DHCP client on Ethernet Port
  • NTP for time synchronization
  • IP address/protocol filter
  • WMM multiple class QoS for each WLAN
  • Primary and Secondary DNS


  • Pre-Shared key authentication
  • MAC authentication
  • IEEE 802.1x EAP support: EAP-MD5, EAP-PEAP, EAP-TLS and EAP-TTLS
  • RADIUS authentication and accounting
  • Failover on Primary and Secondary RADIUS Server
  • Dynamic VLAN assignment authorization


  • WEP security key: 64/128 bits
  • Dynamic key assignment with 802.1x authentication
  • WPA and TKIP
  • WPA2 and 802.11i (AES and CCMP)
  • Rouge AP detection
  • Access control list (ACL)

Network Management

  • Web-based GUI manager
  • CLI through telnet, SSH and console port
  • SNMP v2c: MIB II, SNMP traps and Intelicis MIB
  • System event log
  • Multiple levels of administration privilege
  • Support FTP and TFTP upgrade
  • Flash image disaster recovery

Status LED

  • Power
  • LAN Ethernet: Link/ACT
  • Wireless: 802.11a and 802.11g Link/ACT


  • Plenum-rated case housing
  • RJ45 Ethernet Port
  • Dual RP-TNC antenna connectors for both 2.4GHz and 5.8GHz radios
  • RS232 DB9 console port
  • Manufacture default reset switch

Physical and Operating Environment

  • Dimensions: 190mm(w) x 120mm(d) x 25mm(h)
  • Weight: 1 lb
  • Operating temperature: 0C to 45C (32F to 113F)
  • Storage temperature: -40C to 70C (-40F to 158F)
  • Operating humidity: 10% to 95% non-condensing
  • Storage humidity: 10% to 95% non-condensing

Power Requirement

  • Input: 5V DC, 10W Max (Non PoE mode)
  • Input: 36V DC to 57V DC, 10W Max (PoE mode)

Compliance / Regulatory

  • FCC Part15 Class B, CE Mark



How to Purchase

Become a Partner

Customer Support